- #MAC MINI 2011 UPGRADE HOW TO#
- #MAC MINI 2011 UPGRADE UPGRADE#
If for any reason the old amount of RAM is showing, check this article on how to get your mac to recognize newly installed RAM. Now you should see the new amount of memory on your system where in this case we swapped out 2 GB for 8 GB. Turn on the machine and after it boots up, click on the Apple icon on the Upper left corner of the screen and click About This Mac. Time to see if the new RAM works and is identified by macOS. You’re done! Flip your Mac Mini back over and hook it back up with the power cord, monitor, Keyboard and Mouse, and whatever else you had plugged into it. Grab the bottom cover you set aside, line it up, and snap it back into place. Just a few more steps and you’ll be ready to experience a faster macOS. There you go! Now you have the two new sticks of RAM in your Mac Mini. #MAC MINI 2011 UPGRADE UPGRADE#
Take your time and make sure the upgrade goes successfully. Again, don’t try to force them in if it’s not lined up correctly.
Slide in the second stick of RAM into the top slot. So, now you should have the stick on the bottom replaced, and only have one more to go. Don’t try to force it in, it’s an easy process and the RAM should just slide into the slot easily. Make sure the notch on the memory stick is lined up correctly. Replace the new stick of RAM in the bottom slot first. Now bring over the new RAM sticks you purchased and take them out of their packaging. At this point there should be no memory in the Mac Mini, and the two sticks that came with it are set aside. 
Now take out the second memory stick the same way you took out the first, and set it aside. So at this point you have the first stick out, and will see the second one still inside the Mac. 
Then place the first memory module you removed to the side out of the way. Then remove the sick by pulling it straight out toward the right side of the case. Gently move them outward toward the case so the first memory stick is loose and flips up. There are two metal clips that hold it in place. Just set the cover aside, and here you can see the memory sticks that came with it. Then just remove the cover so you can get at the memory sticks inside. Use the circles on each side of the cover to turn it and you’ll feel it come loose. Now remove the cover by turning it counter clockwise to the unlock position. If you don’t want to scuff up the case, place it on a soft towel. Flip the Mac Mini around so you see the cover on the bottom. The keyboard, mouse, and whatever else is plugged into it – most importantly the power cord! Make sure you have everything unplugged from your Mac. If you really want to be sure, get an anti-static wrist strap.įor this tutorial we’ll be removing the two 1 GB sticks that came with our Mac Mini 2.4 GHz model, and replacing them with two 4 GB sticks for a total of 8 GB of RAM. Note: Make sure you’re grounded and not standing on carpet which can produce static when replacing the memory. If you’re looking to upgrade the RAM in your 2018 Mac Mini, it’s best to go to an Apple Store or Apple authorized shop. * = technically the RAM can be upgraded but it’s significantly more difficult than the steps outlined in this guide. If you have a 2014, 2018* or 2020 model, sadly you’re out of luck. If your Mac Mini model is from 2010, 2011 or 2014 – you’re in luck – your device is memory upgradable. When this guide was initially published back in 2011, all Mac Mini’s could be upgraded. Before You Upgradeįirst things first, you’ll want to make sure you can upgrade the memory on your Mac Mini. This guide shows you step by step how to replace or upgrade the memory (RAM) in your Mac Mini with with new memory sticks.
0 kommentar(er)
